Wall-mounted multifunction displays are often used to display measurements for clean rooms and laboratories. Kimo’s ATE 310 can display three parameters. It can be installed flush-mounted or wall-mounted.
Inquire nowAlternating display of one to three parameters
Three audible and visual alarms
Three analogue inputs 0-5/10 V or 0/4-20 mA
RS485 MODBUS protocol communication
30 pre-programmed units and configurable units
Adjustment certificate
| TECHNICAL DETAILS | |
| Parameters |
Air velocity Airflow Differential pressure Electricity Gas detection Humidity Temperature |
| Displays | 2-line display |
| IP Protection | IP 65 |
| Standards |
2011/65/EU RoHS II 2012/19/EU WEEE 2014/30/EU EMC 2014/35/EU Low Voltage |
| Power Supply | 24 Vac/Vdc ±10% |
| Outputs | 3 x 0/4-20 mA or 3 x 0-5/10 V |
| Ethernet Communication | No |
| Modbus Network | Yes |
| MEASURE DETAILS | |
| Units | °F, °C, % RH, °C Tw, °Ctd, °Ftd, °F Tw, µA, Pa, m³/s, kPa, ppm, g/kg, kj/kg, m/s, A, mbar, l/s, hPa, mA, mV, V, m³/h, km/h, fpm, inWg, mmH2O, mmHg, daPa, cfm |
| Alarm | 3 visual and audible alarms |
| INSTRUMENT DIMENSIONS | |
| Length | 92 mm |
| Width | 44 mm |
| Height | 234 mm |
| Weight | 585 g |
| OPERATING TEMPERATURE | |
| Min | 0.00 °C |
| Max | 50.00 °c |