The Python range of Conveyor Alignment Switches are housed in a rugged die cast aluminium body and painted yellow.
The roller is built from stainless steel and has a 50mm diameter and length of 170mm.
It is designed for use in heavy duty areas to maintain conveyor belt alignment and prevent belts running out of alignment and causing damage to both the line and products.
The steel roller of the switch is placed near to the running edge of the conveyor belt such that deflection of the roller and arm will cause activation “tripping” of the internal contacts of the switch.
Each switch contains two sets of contacts, one which indicates a warning signal (for maintenance purposes) and the other a stop signal, disconnecting the outputs and stopping the belt.
| Features | |
| Contacts: 2NC 2NO | |
| Supply: 24V or 110V or 230V | |
| Indication: With or without LED | |
| Conduit Entry: M20 or 1/2″NPT fitting | |
| Operating Torque: 1.8 – 2.8Nm | |
| Warning Signal: 10 – 18 degrees | |
| Stop Initiated: 15-35 degrees | |
| Ingress Protection: IP67 | |
| ATEX Versions Available | |