Gas detectors GS-220.B.V are monitoring levels of combustible, toxic or refrigerant gases.
Different principles of detection with catalytic, semiconductor or electrochemical sensor elements are used.
Reliable operation of the detector is ensured by the self-diagnostic function, which constantly monitors the condition of the sensor and signal lines and alerts in case of fault.
Sensor calibration is done remotely with magnetic key without opening the enclosure that facilitates periodic inspection and maintenance.
Gas sensors GS-220.B.V are in a metal housing with IP 65.
Application | |||
Gas Sensor GS-220.B.V is intended for detection and measurement of combustible, toxic or refrigerant gases. | |||
Detected gases | Formula | Measuring range | Order code |
Ammonia | NH3 | 0 - 100% LEL | GS-220.B.V.02- |
Acetilene | C2H2 | 0 - 100% LEL | GS-220.B.V |
Acetone | (CH3)2CO | 0 - 100% LEL | GS-220.B.V |
Hydrogen | ?2 | 0 - 100% LEL | GS-220.B.V |
Ethanol | C2H5OH | 0 - 100% LEL | GS-220.B.V |
Methane | CH4 | 0 - 100% LEL | GS-220.B.V |
LPG | 0 - 100% LEL | GS-220.B.V | |
Hexane | C6H14 | 0 - 100% LEL | GS-220.B.V |
Carbon monoxide | CO | 0 - 500 ppm | GS-220.B.V |
Carbon dioxide | CO2 | 0 - 15000 ppm | GS-220.B.V |
Hydrogen sulphide | H2S | 0 - 100 ppm | GS-220.B.V |
Oxygen | O2 | 0 - 25 %v | GS-220.B.V |
Freons | 0 - 2000 ppm | GS-220.B.V | |
Sensors for gases, not listed in the table are made with preliminary order. |
TECHNICAL SPECIFICATIONS |
measurement principle: semiconductor, catalytic, electrochemical
measuring range: depends from the detected gas
output signal: digital
working voltage: 12V÷30VDC
power consumption: < 2W
weght: 0,520 kg
sizes: 155 ? 95 ? 48 mm
enclosure material: aluminium
ingress protection: IP65
cable glands: 1/2/3 - ?16/M20
working temperature: -20 ÷ + 50 ºC
humidity: 30 ÷ 90% RH
pressure: 1 bar ± 20%
runtime: till 5 years under standard conditions for semiconductor and catalityc sensors
meets the requirements of EN 50270
ATEX certification: EX II 2G Ex Ia IIC T5