Professional process calibrator/multimeter
Model HT8100 is a professional device which groups measurements such as TRMS multimeter and function of process calibrator capable of generating current signals DC 0-20mA and 4-20mA.
| Functions | |
| Measuring counts | |
| TRMS | |
| AC/DC voltage | 1000V anche AC+DC |
| AC/DC current | 1A anche AC+DC |
| Resistance and buzzer continuity | |
| Diode test | |
| Frequency | |
| DC 4-20mA current measurement | |
| DC 0-10V voltage measurement | |
| DC 4-20mA current generation | |
| Measurement of output current of transducers | |
| Simulation of an external transducer | |
| Loop supply with minimum voltage 24V | |
| Generation of selectable ramp | |
| Load of 250Ω for testing HART transducers | |
| Backlit LCD display | |
| Autorange | |
| Auto Power OFF | |
| Data HOLD | |
| MIN/MAX function | |
| AVG function | |
| Relative measurement | |
| Protection category | CAT IV |
| Weight in grams (batteries included) | |
| Size (LxWxH) (mm) | |
As a digital multimeter, the device mainly carries out AC/DC voltage and AC/DC current measurements. In its function as a current generator (values can be displayed also in a percentage format) options 0-20mA and 4-20mA are available, with manual and automatic settings of thresholds on the output signal. This model also allows measuring the current absorbed by external transducers directly supplied by it and simulating the presence of a transducer with adjustable current in its whole measuring range. HT8100 is capable of saving the results of measurements in its internal memory and has been designed in compliance with safety standard IEC/EN61010-1 in CAT III 1000V and CAT IV 600V with double protective insulation. Each function can be selected through the appropriate buttons found on the front panel. This device is the ideal solution for typical industrial automation applications.
| Guidelines | |
| CE MARK | |
| EMC: IEC/EN61326 | |
| IEC/EN61010-1 | |