The humimeter PMZ allows a quick and accurate moisture measurement of the pulp sheets directly in the stack.
| FEATURES |
Fast and non-destructive measurement
Measuring range: 6% to 40% absolute water content (material dependent)
Resolution: 0,1% water content
Pulp temperature: 0 to +50°C
Selectable temperature in °C and °F
Infrared temperature measurement
Pulp - density range 450 - 900 kg/m³
Can be used for sulphate and sulphite process
For bleached and unbleached cellulose fibres
12 standard calibration curves (expandable)
Automatic temperature compensation
Manual memory for 10.000 measurements
Dimensions: 575 x 75 x 46 mm
Weight: 685g (with batteries)
Measurement results within seconds
Scope of supply: humimeter PMZ, handlebar, wooden case, rubber protection and batteries
Optional: humimeter USB data interface module with LogMemorizer data logger and analysis software on USB stick, portable thermo-printer, bluetooth interface module
| Accessories and Extensions | |
| Art. No. | Extended accessories |
| 12308 | Test block - For checking the calibration between two different points |
| 12627 | Bluetooth module, class 1, module for humimeter devices with USB interface and appropriate software |
| 12278 | humimeter USB data interface module with LogMemorizer measuring data recording and analysing software on USB flash drive incl. USB cable for PC |
| 11733 | Thermo printer runs by battery, industrial model, portable |
| 10600 | Factory calibration certificate. Protocol documenting the calibration of material moisture meters before delivery |
| Your benefits |
Quick and highly accurate measurement using a non-destructive method
Simple handling
Small, handy, applicable everywhere on site
Menu languages in English, German, Italian, French, Spanish, Russian, Portuguese, Czech and Polish.
Art.No: 14100 humimeter PMZ
| Measurement and handling: |
Turn on the measuring meter, select the correct characteristic (dependent on the fibre type) and insert the meter into the pile. The measured result is immediately shown on the display. This allows to measure large quantities of cellulose / pulp in a very short time without removing single layers from the piles.
The device has a memory for up to 10,000 readings as well as the option to record additional data, such as a charge number. The device automatically calculates the average value for each saved measurement series. The measuring device has two robust electrodes, which have to be inserted into the pile.
On the back of the device is a removable handle for easy use of the device. The optionally available USB interface enables you to transfer the measured results to a PC and archive, evaluate, export or print them using the LogMemorizer PC software.