| The advantages at a glance |
Data logger with remote data transmission
For 2" level pipe installation
Connection of e.g. level sensors and ultrasonic sensors (such as Hydrolog HP4 and Sonicont USP4)
Bluetooth and cellular (GSM, LTE)
Provider-independent - the strongest provider on site is chosen
Configurable via app
Redundancy function of the measurement
Memory for 500,000 measured values
5 sensor inputs (2x 4 ... 20mA, 2x Modbus, 1x switching input)
Battery or accumulator operation
External DC supply
PV module connection
IP68 - flood-proof up to 3m water column
Materials approved for drinking water
|
Hilfsenergie |
|
|
Batterie B1 |
Lithium / 3,6V-19Ah |
|
Batterie B2 |
Lithium / 3,6V-35Ah |
|
Akkumulator A1 |
LiION / 4,2V-10Ah |
|
Versorgungsspannung DC |
7…32VDC / ≤ 350mA |
|
PV-Modul |
4,5…35VDC / ≤ 1A |
|
Eingang COM CI1 / CI2 |
|
|
Schnittstelle |
RS485, bidirektional / Modbus®-RTU / 9600 Baud (4800…38400 Baud) |
|
Eingangswiderstand |
96k? |
|
Eingang Analog AI1-I / AI2-I |
|
|
Referenzbedingungen |
EN/IEC 60770-1: Kennlinienabweichung – Grenzpunkteinstellung 15..25°C / 860..1060kPa / 45..75%r.F. / ton240s / Batterie 35Ah |
|
|
Kennlinienabweichung = Nichtlinearität + Hysterese + Wiederholbarkeit FSI = Full Scale Input = Nennmessspanne |
|
Arbeitsbereich |
FSI 0…28mA / Ri 27R |
|
Auflösung |
FSI 16 Bit |
|
Kennlinienabweichung |
≤ ±0,05% FSI |
|
Temperaturabweichung |
≤ ±0,1% FSI / 10K |
|
Langzeitdrift |
≤ ±0,05% FSI / Jahr |
|
Eingang Digital DI1 |
|
|
Arbeitsbereich |
≤ 20kOhm / ≤ 1kHz |
|
Messumformerversorgung |
|
|
Ausgangsspannung UO1 / UO2 |
16,6V ±0,3V (0mA) / 15,9V ±0,3V (30mA) / 0…30mA, max. 40mA |
|
Ausgangsspannung UO3 / OU4 |
6,7V ±0,2V (0mA) / 6,6V ±0,2V (100mA) / 0…100mA, max. 300mA |
|
Interface Bluetooth |
|
|
Version |
Bluetooth 5.0 LE (2Mbit/s, Advertising Mode 2s) |
|
Sendeleistung |
≤ 0,1W |
|
Reichweite |
Outdoor max. 200m / Indoor max. 40m |
|
Interface 4G/2G |
|
|
Version |
4G LTE Cat. 1 (B3, B8, B20) 2G EDGE, GSM, GPRS (900MHz/1800MHz) |
|
Sendeleistung |
4G ≤ 0,2W 2G ≤ 2W |
|
SIM |
Interne SIM + Externe Micro-SIM |
|
Antennenanschluss |
Stecker SMA / 50Ohm |
|
Datenspeicher |
|
|
Speichergröße |
8MB, ≥ 800.000 Messwerte |
|
Clock |
|
|
Ganggenauigkeit |
≤ ±1 Minute / Monat |
|
Umgebungsbedingungen |
|
|
Umgebungstemperatur |
-20°C...+60°C |
|
Schutzart |
IP68 [≤3m/≤0,3bar] (EN/IEC 60529) |
|
Klimaklasse |
4K4H (EN/IEC 60721-3-4) |
|
Stoßfestigkeit |
15g [11ms] (EN/IEC 60068-2-27) |
|
Schwingungsfestigkeit |
4g [10…2000 Hz] (EN/IEC 60068-2-6) |
|
EM – Verträglichkeit |
Betriebsmittel Klasse B / Industriebereich (EN/IEC 61326) |
|
MTTF |
258 Jahre |
|
Gewicht |
0,9kg |
|
Werkstoffe |
|
|
prozessberührend |
PA, Aluminium, PUR, Messing, Nickel, Silikon, NBR |
| Applications |
The Hydrolog HLF4 is used for measured value recording and remote data transmission from level probes, ultrasonic sensors or similar level sensors.
A new and innovative redundancy function makes it possible to have the Hydrolog HLF4 automatically verify measured values. The recorded data are cyclically transferred to the ACS portal on the Internet. There they can be analysed and processed by the authorized user from any location.
The areas of application range from groundwater monitoring, surface water measurement, landfill monitoring, to rainwater overflow logging.
The well thought-out alarm management enables the danger of flooding or even low water to be eliminated or reduced.
| Function |
The battery operated data logger serves as a link between the measuring point e.g. with a level sensor from the Hydrolog® series and the data platform on the Internet.
Depending on the setting and sensor, a battery can achieve a service life of more than 5 years. It is possible to operate the Hydrolog HLF4 using an external power supply or PV modules instead of batteries.
The data transfer to the ACS portal on the Internet is carried out automatically by the strongest mobile operator on site. It does not matter whether there is 2G GSM or 4G LTE network coverage. The SIM card is already integrated in the device. The user does not need any further mobile phone contracts.
The multifunctional input makes it possible to connect standard sensors as well as energy-saving digital sensors.
The built-in redundancy function makes it possible to compare two measured values from different sensors. This means that measured values can be verified and an alarm is triggered automatically at an adjustable difference. This results in the highest level of measurement reliability combined with a minimum of control measurements.
Operation on site is via a Bluetooth interface in connection with an app. No special devices are required for this. A smartphone, tablet or laptop is sufficient for operation.