Multifunction tester for non-trip earth resistance measurement and rcd tests - CODMETEL: HV000418
Inquire nowMultifunction device for overall earth resistance measurement and rcd tests
SPEED418 has been specifically developed to measure Overall earth resistance with no RCD tripping directly at the outlets to be measured and for operating tests of RCDs type A, AC General and Selective with tests both in manual and automatic mode in private electric installations.
By always using it before starting working on an already existing system (which the operator therefore does not know well) and at the end of the job, this device will guarantee the necessary safety to both operators and users of the electric systems! Thanks to its small size, this device offers many operating opportunities. M73 is also used to test the safety of electric system; it s therefore capable of measuring non-trip earth resistance, carrying out tests on RCDs type A and AC and measuring Insulation and Continuity. At the end of the test, the device shows all results with the indication of compliance or non-compliance with the standards with simple symbols di OK or NOT OK.
| Functions | |
| TRMS | |
| Measuring range of verifiable rated currents | 10,30,100,300,500,650,1000mA |
| Tripping time of type A, AC General and Selective RCDs | |
| Ramp test for tipping current of RCDs type A, AC General and Selective | Only general RCDs up to 650mA |
| Non-trip earth resistance | |
| Loop/Line impedance, Phase-Phase, Phase-Neutral, Phase-PE | |
| Loop/Line impedance Phase-Phase, Phase-Neutral, Phase-PE with high resolution (0.1mΩ) | |
| Contact voltage | |
| Optical/USB serial port for PC connection | |
| RS232/optical/USB interface for transferring data onto the PC | Optical/USB |
| Measurement category | CAT III |
Extremely simple to use, with setting of parameters via scrollthrough menu. It has no mechanical commuters and it is therefore more solid in structure. The device is provided with an internal memory for saving measurements and with an optical/USB interface for transferring measured data onto the PC. At the end of the test, the device shows all results with the indication of compliance or non-compliance with the standards with simple symbols OK or NOT OK.
| Guidelines | |
| CEI 64-8 | |
| CEI 64-8 612.6.3 | |
| CE MARK | |
| EMC 2014/30/EU | |
| EMC: IEC/EN61326 | |
| EN61008 | |
| IEC/EN61010-1 | |
| IEC/EN61187 | |
| IEC/EN61557-1 | |
| IEC/EN61557-3 | |
| IEC/EN61557-6 | |
| IEC/EN61557-7 | |
| LVD 2014/35/EU | |
| UNE20460 | |
| VDE 0100 | |